Tag: Relative Feed Value

Carbohydrates and Forage Quality

The function of carbohydrates in any animal’s diet is to provide energy.  Some carbohydrates are more easily digestible and provide energy to the animal, or in the case of the beef cattle, to the rumen microbes more rapidly.  These carbohydrates are Non-Fiber Carbohydrates (NFC). Examples of NFC are starch and sugars, such as glucose and fructose, which are measured at Ward Laboratories Inc. as Total Sugars Invert (TSI).  Starch is also analyzed at Ward Laboratories Inc.  by breaking down the polysaccharide into simple sugars.  An example of a high starch forage is good quality corn silage.  An example of a high sugar forage is high quality alfalfa hay or haylage.

Samples dissolving into buffer on the hot plate with stir bars for starch analysis

 

 

 

Fibrous carbohydrates such as cellulose, hemicellulose and lignin are slowly digested.  In ruminant nutrition the two fiber types we typically use in formulation of feed rations and in evaluation of forage quality are Neutral Detergent Fiber (NDF) and Acid Detergent Fiber (ADF).  The indigestible and slowly digestible portion of feed is represented by NDF which contains cellulose, hemicellulose, and lignin.  The least digestible portion of feed is represented by ADF and contains cellulose and lignin but not hemicellulose.  Therefore, ADF is always less than NDF when represented as a percentage of the feed or forage being analyzed.

img_0943.jpg
ADF and NDF are measured using Ankom bag technology.

The Neutral Detergent Fiber of a feed makes up the floating mat of feed in the rumen.  This floating mat physically stimulates the animal’s digestive processes, specifically rumination.  A high NDF feed typically forms a mat that exists for a longer period of time in the rumen resulting in the animal feeling full longer due to the physical gut fill and consequently consuming less feed.  In summary, high NDF feeds, typically low-quality forages, are predictive of low dry matter intake, while low NDF feeds are predictive of a higher dry matter intake.

Acid Detergent Fiber is used in predictive equations to calculate the energy content of the feed.  Total Digestible Nutrients (TDN), Net Energy of Gain (NEg) and Net Energy of Maintenance (NEm) can all be calculated using the ADF value.  Feeds with a higher percentage of ADF have a lower percentage of the high energy sugars and starches.  Therefore, high ADF feeds and forages have lower energy values and low ADF feeds and forages have high energy values.

At Ward Laboratories Inc. I receive phone calls inquiring about why certain forage reports have higher Relative Feed Values (RFV) or Relative Forage Qualities (RFQ) than others or why those two index values do not match for the same feed.

Relative Feed Value was created to quickly compare the quality of legume hays such as alfalfa or clover. We often apply this index to other forages, or feeds forgetting the original purpose and loosing the understanding that it was not originally meant to be applied to grass hays, corn stalks and especially not corn grains and other non-forage feeds.  Therefore, non-legume forages typically have lower than expected RFVs and animals consuming this hay perform better than the index value would predict.

Relative Forage Quality was created to be inclusive of most forages and is a quick way to fairly compare one forage to another weather it is a grass hay or legume.  The values for RFV and RFQ on the same feed often are separated by as much as 20 points because RFV uses ADF and NDF to predict digestible dry matter and dry matter intake while RFQ uses crude protein, fat, NDF, NDF digestibility among other factors to predict dry matter intake and total digestible nutrients.  South Dakota State University Extension has put together a great resource for better understanding of RFV and RFQ.  Below are the simplified equations for each index:

RFV = Digestible Dry Matter × Dry Matter Intake / 1.29

RFQ=Dry Matter Intake × Total Digestible Nutrients /1.23

    In conclusion, carbohydrates provide energy to the beef cow and support the growth and role rumen microbes play in ruminant digestion.  The higher percentage of the forage or hay is made up of fibrous fractions, such as ADF and NDF, the less NFC are available to rapidly provide energy.  Therefore, as ADF and NDF increase the forage quality decreases due to lower energy values and declining feed intake.  So, when feeding low quality forages such as old cane hay or corn stalks it is important to provide energy supplements in the form of beet pulp, distillers grains, corn grains or molasses based liquid supplements for example. However, on low ADF and NDF, high quality forages little to no supplementation is needed to support animal maintence and production performance.

Quarrels About Quality: 14 Sources of Variation in Forage and Hay Testing

When it comes to hay testing, producers commonly grumble about the variation in Relative Feed Value (RFV) and protein content, based on their observations and what the lab reported.

Producers often have these concerns, because the RFV determines the price of a forage and how much customers are willing to pay.  An underestimated RFV can result in decreased profit for forage producers.  A couple weeks ago, I attended the NIRS Consortium annual meeting where Rocky Lemus gave a very informative talk about the importance of proper sampling, which addressed the producer concerns I often hear.  Variation in forage test results can come from in the field, storage, sampling, and in the lab. Here are 14 common sources of variation within a forage sample:

 

  1. The leaf : stem ratio, forages with a higher leaf : stem ratio are typically higher in protein and RFV. This is because the leafy portion of the plant contains more protein than the stems. Additionally, the stems are a structural part of the plant containing higher amounts of fiber.  Acid detergent fiber (ADF) and neutral detergent fiber (NDF) are used to calculate RFV therefore, forages and hays with more leaves and less stems are lower in ADF and NDF and higher in RFV.

 

  1. The weed content of a forage can affect the RFV. Weeds are high fiber plants, so the more weeds contaminating the forage or hay the lower the RFV. Weeds also tend to be lower in protein, thereby also affecting the nutritional content of the forage.

 

  1. Baling conditions can also affect the RFV of a hay. If hay is baled under moist conditions or after having been rained on, the water-soluble sugars have been removed from and plant. The percent of ADF and NDF are increased due to the absence of sugars.  The result is a RFV and lower energy forage.

 

  1. Species of forage also affects RFV. This is not news to hay producers or livestock feeders.  It is well understood that legume forages such as alfalfa and clover are typically higher protein and higher RFV, than grasses.  This is a result of the leaf : stem ratios.

 

  1. The maturity of a plant can also affect the feed value. Older more mature plants are more fibrous, and they typically have a lower RFV than a lush growing forage.                     plant maturity

 

  1. Fertilization can result in higher protein in a forage and lower ADF and NDF. Fertilization management may help produce high quality forages. Be cautious to avoid creating a high nitrate forage by applying too much fertilizer.

 

  1. Proper storage of a baled hay is very important. Reduce ground contact as this will result in accumulation of moisture from the ground and a decreased RFV. Protect your baled hay from the elements to avoid losses of soluble sugars and protein.  Wind and rain alike can remove the leafy portion of the plant thereby decreasing protein and RFV.

 

  1. Division of forages into separate lots can affect the accuracy and representation of a forage sample. Lots should be defined by both species and field from which it was baled. For example:  If there are three fields two alfalfa and one grass, the lots need to be separated by not only species, but also field as one location may have a differing quality that the other based on management, precipitation differences, or topographical differences.  Therefore, I would send three separate hay samples to Ward Laboratories, INC. for NIR testing.

 

  1. Proper sampling procedure is very important. Using a hay probe is the key to ensuring a representative sample. Hay probes can accurately represent the leaf : stem ratio, whereas using a hand grab can result in the leafy portions falling through fingers and obtaining an overrepresentation of stems and a lower RFV.  Additionally, with a hand grab only one layer of the bale can be grabbed and to ensure a representative sample it is important to sample several inches inside the bale.  For more guidelines and to become a certified hay tester visit the National Forage Testing Association.

 

  1. The number of cores taken is another source of variation when testing. The recommendation is to combine 20 randomly selected cores. The difference between taking 20 cores and 10 cores can cause variation in crude protein by up to 5%, meaning taking only 10 cores could either over estimate nutrient values or under estimate them.

 

  1. It is very important to ensure proper treatment of samples in delivery. If the sample is hay, it is typically dry enough to not have cause for concern. If it is a fresh forage clipping, check the moisture, if it is very damp rotting can occur on its way to the lab in just a few days stuffed in a box with other samples or envelopes.  Of course, the portion of the plant that rots first is the leaves, so the RFV decreases when this happens on the way to the lab.

 

  1. Splitting in the lab can also affect RFV. Ward Laboratories, INC. uses the cone and quarter method on all forage samples that come in the lab. It is very important that when the lab splits the sample for the portion to be tested it represents the sub sample given to us.  Sometimes, it is requested to send the sample on to other labs, when this happens, the sample is split into two – three sub samples and the NIR scans are checked to ensure the sub samples nutritional values repeat.  This way we can keep some sample in our lab in case further testing is requested and it is a good way to check that our sub-sampling procedure is accurate.                                                                                                                                                                                                                                                      img_2506-e1517945202593.jpg

 

  1. Drying of the sample in the lab can result in heat damage to the sample therefore again decreasing RFV. Ward Laboratories, INC dries samples in an oven at 64°C before grinding, the typical dry matter after grinding is between 95-97% dry matter. Other labs use microwave ovens for faster drying time, however using a microwave does result in higher incidence of heat damage to samples.

 

  1. Grinding of the sample can also make a difference as to how it scans NIR. Ward Laboratories, Inc. grinds samples through a 1mm screen. More coarse grinding can cause inaccurate results on the NIR instrument.

 

When questioning results of a forage or hay sample, consider all the sources of variation that went into that sample. Sampling plants is tricky business as it is a variable material.  Always do your best to take a representative sample.  Call the lab if you have questions or concerns before taking your sample or interpreting your results.